This is the complete Qisheng manufacturing range, from fully automatic turn-key production lines down to individual machines and packing equipment. Pick a family below, or browse the whole list.
Turn-key concrete block and brick plants, from batching and mixing to curing, cubing and automatic packaging. Suitable for pavers, hollow blocks, imitation stone (PC) bricks, kerb stones and thin-wall insulation blocks.
The flagship line for surface-critical products: permeable pavers, imitation-stone PC bricks and thin-wall insulation blocks.
More complete, better laid out and lower cost than comparable imported lines. And it connects to any block machine brand.
Only 3–4 workers for the whole plant. Choose track power or lithium battery, single-layer or multi-layer curing.
Brick/pallet separation, brick arranging and palletizing for cured blocks. Low-position, high-level, fixed, simple, double-station and mobile (crawler) types, match with any brand of block machine.
One operator, about 3,800 pallets per shift. Separates, arranges and stacks cured blocks into 1,000–1,200 mm square stacks.
Leaves the forklift holes in the stack itself, no pallet needed downstream, and the original line keeps working normally.
Fixed inside the workshop, dual independent hydraulic circuits, brick clamp and pallet clamp working at the same time.
Direct brick-pallet separation with no brick dividing, about 16 seconds per layer, 2,000 pallets per shift.
Two-way cubing, left and right, about 13 seconds per layer and roughly double the output of the single-station version.
Crawler-mounted and remote controlled, cube wherever the bricks are, up to 20 layers of solid brick in one pass.
Vibration-press block machines from QST6-15 up to QST1800, including servo-driven and pallet-free wet-block types. One machine, many products, change the mould, change the product.
Servo-driven, high-output flagship. Up to 220,000 standard bricks per 8-hour shift on the QST1800.
Electro-hydraulic integration, 20% higher output and 30% faster fault-finding than ordinary block machines.
The entry-level workhorse, the lowest investment way into automatic block production, with genuine imported hydraulic and electrical components.
One brick machine, one pallet: bricks are cubed wet, straight off the machine, no pallet fleet, no pallet return.
Static (hydraulic) pressing machines for high-strength solid bricks, pavers and shaped products. Single-direction and double-direction pressing, pallet-free options available.
Pallet-free static pressing with compaction from both directions, dense, sharp-edged, high-strength products.
Low noise, low vibration, four sizes, the quiet workhorse for shaped concrete products.
Semi-dry gypsum block lines, AAC block intelligent hole-leaving cuber lines and lightweight composite wall panel equipment, for factories diversifying into higher-value building materials.
Water-to-gypsum ratio cut to about 30%, blocks go to the warehouse without drying or airing, and comfortably exceed JC/T 698-2010.
Mould-line production of cement composite sandwich partition panels, in 60 / 75 / 90 / 120 mould configurations.
Retrofits onto your existing AAC line and re-stacks the finished product with forklift holes, no pallets, fully automatic.
Automatic balers, wrapping machines, forklift clamps, pallet feeders, planetary mixers and batching machines, everything around the block machine.
Keeps the block machine fed with pallets automatically, PLC plus hydraulic drive, one operator less.
Five-sided sealed packaging, moisture-proof, rain-proof and dust-proof, with no operator needed.
Lift 500–800 standard bricks or 40 hollow blocks in one bite, and load the truck without pallets.
PET strapping from above with touch-screen control, 15–18 seconds per strap, 200–2,500 N tension.
Linear-travel head, about 15 seconds per strap through the arch, and only 800 kg of machine to install.
Built for the high-end end of the market: sponge-city permeable eco-bricks and PC imitation-stone landscape bricks.
Three-point induction weighing with fast and slow dosing, plus vibration to keep material flowing.
Send us the product, the size and your target daily output. We will recommend the right model and price it.
Tell us the products you want to make and your target daily output, and we will send the machine list with specifications and prices.
Quanzhou Qisheng Machinery Manufacturing Co., Ltd. · jinsenjiu@gmail.com · WhatsApp